Agilent 86061C 光開關

銷售,租賃,維修,回購利用,技術方案支持等服務=深圳市美佳特科技有限公司

?

主要特性與技術指標

• 溫度的穩定提高了性能
• 帶有易于使用的手動界面，顯示可視信號路徑
• 用于控制多個開關配置的多層軟件
• 可重復性開關，使用壽命超過1000萬次循環
• GPIB和RS-232控制
• 兼容SCPI的命令

Switch Sizea 1×4

GENERAL SPECIFICATIONS

Temperature Range

Operating

Storage

+0°C to +55°C

–40°C to +70°C

Humidity

Operating

Storage

Maximum relative humidity 95% for temperatures up to 40°C (non-condensing)

Maximum relative humidity less than 90% at 65°C

Altitude Altitude up to 15,000 feet (4,572 meters).

EMI Compatibility Conducted and radiated emissions meet the requirements of CISPR Publication 11 and

EN 55011 Group 1, Class A.

Power Requirements 100/115/230/240 V (range 90 to 254 Vac),

50/60 Hz (range 47 to 63 Hz)

Power Consumption Up to 80 VA

Installation Category Category II per I.E.C. 1010

Pollution Degree Degree 2 per I.E.C. 664

Usage For indoor use.

Enclosure Protection IP 2 0, according to IEC 529

Insertion Lossa

Single-mode switches

Multi-mode switches

a. Insertion loss does not include connectors. Include an additional 0.5 dB (0.25 dB characteristic) for each

connector.

1.0 dB (0.7 dB)

0.8 dB (0.6 dB)

Insertion Loss Stabilityb

b. Drift of any channel relative to one assigned reference channel at ±3°C deviation of ambient temperature

over 7 day period.

±0.03 dB (±0.025)

Repeatability c

Sequential switching

Random switching

c. Repeatability measured after four (4) hours warm-up and with a one (1) second pause between

movements.

±0.008 dB (±0.005)

±0.025 dB (±0.01)

Optical Return Lossd

Single-mode

Multimode

d. Excludes external pigtail backscatter and connector reflections.

58 dB (62 dB)

20 dB (25 dB)

Polarization Dependent Losse

e. Polarization dependent loss only applies to single-mode switches and is measured at 1550 nm.

0.05 dB (0.02 dB)

Isolation –80 dB (–100 dB)

Typical Switching Life 10 million cycles, minimum

Switching Time

Between adjacent channels

Each additional channel

330 msec

50 msec